Best 140 degrees industrial drill bits list 2020 – Top Pick

“As an Amazon Associate I earn from qualifying purchases.”

We analyzed
7029 of user reviews
about the 140 degrees industrial drill bits to provide you with the best list. Our list, which is updated daily, honestly presents the ranking of the best 140 degrees industrial drill bits.

Best 140 degrees industrial drill bits 2020 list

Bestseller No. 1
Sandvik Coromant CoroDrill Delta-C R840 Carbide Drill Bit, Jobber Length, Multilayer Finish, Round Shank, Coolant Through, 140 Degree Point, 5.8mm Size, 44mm Cutting Length
  • Jobber length drill bit has a midrange drilling depth of 4 to 5 times its diameter for general-purpose applications
  • Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS)
  • Multi-layer coating of titanium nitride (TiN) over titanium aluminum nitride (TiAlN) provides wear resistance and detection, corrosion resistance, and high hardness for extended tool life
  • Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips
  • Drill bit conforms to DIN 6537 standard, and the round shank conforms to DIN 6535 HA standard
Bestseller No. 2
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 3/32" Size
  • Straight flutes drill shallow and horizontal holes in cast iron, and non-ferrous and hardened materials
  • Carbide resists wear better than high-speed or cobalt steel and withstands high speeds
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials
  • Self-centering 140-degree 4-facet point provides strength and high accuracy to penetrate material more easily than a conventional point, and produces small chips to reduce clogging
  • Round shank accommodates most drill chucks
Bestseller No. 3
Cobra Carbide 32396 Micro Grain Solid Carbide Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degrees Special Point, 7/32" Size, 2-3/8" Length (Pack of 1)
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications
  • The added web strength of the straight flutes and special point configuration easily penetrate work pieces with minimal deflection
Bestseller No. 4
Drill Doctor 750X Drill Bit Sharpener
  • SHARPEN MULTIPLE TYPES OF DRILL BITS – high-speed steel, masonry, cobalt, & TiN-coated drill bits. Designed for the serious tool user, this professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often
  • CUSTOM POINT ANGLE SHARPENING – set any angle from 115° to 140° with cast aluminum point angle shuttle for added durability, a unique BACK-CUT split-point bit an extra-narrow chisel point, making it faster to penetrate and less likely to wander on the material you are drilling in to
  • EXTEND THE LIFE OF YOUR BITS – from 3/32-inch to ¾-inch, create & remove split points & adjustable material take-off allows you to adjust the amount of material removed during sharpening; 6 foot power cord. Permanent magnet motor produces consistent power, regardless of speed or load
  • 3-YEAR WARRANTY - protects every Drill Doctor bit sharpener against defects due to workmanship or design, using a 115V machine in a location with 230V power sources voids the warranty
  • MANUFACTURED IN OREGON - we design, engineer, & assemble our sharpening machines all under one roof in the USA
Bestseller No. 5
Cobra Carbide 32388 Micro Grain Solid Carbide Jobber Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degrees Special Point, #3 Size, 2-3/8" Length (Pack of 1)
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications
  • The added web strength of the straight flutes and special point configuration easily penetrate work pieces with minimal deflection
Bestseller No. 7
Cobra Carbide 55016 BlackMamba Micro Grain Solid Carbide 5XD Coolant Fed Hi-Performance Jobber Drill Bit, TiAlN Coated, Round Shank, Spiral Flute, 140 Degrees Split Point, 3/8" Size, 4.05" Length (Pack of 1)
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • 140 degrees point angle and high performance geometry allows for high penetration rates
SaleBestseller No. 8
Irwin Industrial Tool 3015020 5/16" 140 Degree Split Point Titanium Coated Drill Bit
  • This are easy to use
  • This is highly durable
  • This is manufactured in China
Bestseller No. 9
Irwin Industrial Tool 3015010 5/32" 140 Degree Split Point Titanium Coated Drill Bit
  • This are easy to use
  • This is highly durable
  • This is manufactured in China
Bestseller No. 10
YG-1 DH408 Carbide Dream Micro Drill Bit, TiAlN Finish, Straight Shank, Slow Spiral, 140 Degree, 9.8mm Diameter x 103mm Length (Pack of 1)
  • Long length dream drill bits with coolant holes
  • Right hand spiral, 30 degree helix
  • 140 Degree point angle
  • Made of carbide
  • Application for drilling into steel in general, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy metal, non-ferrous light metal, abrasive plastic

Last update on 2020-11-29 at 11:20 / Affiliate links / Images from Amazon Product Advertising API

Best Editor’choice:

Last updated on September 18, 2020 2:20 am

Conclusion:

We have listed the top 10 best 140 degrees industrial drill bits above. We hope you can choose the best one from that list. Thank you!