Best 35 5 millimeters wood drill bits review 2021 – Top Pick

“As an Amazon Associate I earn from qualifying purchases.”

Don’t BUY before reading my 35 5 millimeters wood drill bits review first. It will save your time and money!

Best 35 5 millimeters wood drill bits list 2021. Detail review below the list:

Last updated on January 5, 2021 5:45 am

Detail review:

Titanium Step Drill Bit Set 5-35mm Step Cone HSS Coated 13 Steps HSS Double Straight Slot Round Shank Cut Holes Tool for Wood Stainless High Speed Steel Sheet Metal Hole Stepped Up Bits

 in stock
Amazon.com
as of January 5, 2021 5:45 am

Features

  • Ultra durable, high quality HSS steel with Titanium coated, Titanium coated to reduce friction and heat.
  • With just a small amount of pressure required and automatically burr holes as you drill.
  • Provides fast, smooth and clean cuts, each step is clearly labeled with the depth diameter.
  • Hole Sizes : 13steps (5 , 7 , 10 , 12 , 15 , 17 , 20 , 22 , 25 , 27 , 30 , 32 , 35mm)
  • Widely used to cut holes in a variety of material like steel, wood, thin iron, aluminum alloy, insulation boards, PVC sheet.

Irwin 11105ZR Unibit5M 5-Millimeter to 35 -Millimeter by 1/2-Inch Shank Step Drill Bit

 in stock
5 new from $68.63
1 used from $32.54
Amazon.com
as of January 5, 2021 5:45 am

Features

  • Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates
  • Single-flute cutting edge for greater control through steps
  • 3 faltted shank prevents slipping in drill chuck
  • New SpeedPoint tip penetrates faster than previous Unibits and prevents walking

FTG Maximum Torque - 5 Piece Adjustable Wood Countersink Drill Bit Set #4, 6, 8, 10, 12 with Woodworking HSS Tapered Bits Secured with Pin and Hex Wrench (1/8" Allen Key) Included

 in stock
Amazon.com
as of January 5, 2021 5:45 am

Features

  • One of the best and most popular countersink drill bits set for wood. Bits secured with pin Never Come Loose from shank; Top Quality material components highly durable:Tapered drill bit HSS M2 (Grade 6542), by far the best High Speed Steel, for its high toughness, wear resistance, and good cutting edge retention; 4 cutter #45 Carbon Steel; featuring 5 Piece countersink #4 (7/64 inch), #6 (9/64 inch), #8 (11/64 inch), #10 (3/16 inch), #12 (7/32 inch)
  • Adjustable 4-cutter counter bore, chamfer angle 82 degree, cuts and clears chips quicker for fast, smooth countersinking; the countersink works effortlessly even after many uses; it makes clean and consistent tapered holes for screws without the need of a stop collar
  • Tapered drill pointed tip with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws; tapered drill bits can be replaced with a replacement bit of the same type and sizes (sold separately) for extended life; Logo brand laser printed on each countersink shank offering confidence in product authenticity
  • Quality built counter bore attaches to flats on shank with 2 hex screws for a secure fit and can be adjusted for controlled pilot hole depth; Drill, countersink and counterbore in 1 step; the countersink cutter providing superior speed and clean finish
  • Universal 1/4 inch hex shank prevents slipping in standard chucks and is compatible with all 1/4 inch quick-change chucks, including impact drills; this product is Professionally manufactured in China at FTG USA specifications; Hex Key (Allen Wrench) included

Yonico 41105L 5mm Left Hand Brad Point Boring Bit 10mm Shank

 in stock
2 new from $9.95
Free shipping
Amazon.com
as of January 5, 2021 5:45 am

Features

  • 5mm diameter and a 33mm cutting depth. The shank is 10mm
  • Drill blind bore holes for dowels, pins and screws
  • Carbide tipped for quality, durability and performance
  • Compatible with all standard drill press chucks

Step Drill Bit High Speed Steel Cone Drill Bit Wood Metal Drilling Cutter 5mm-35mm Total 13 Step Sizes

 in stock
Amazon.com
as of January 5, 2021 5:45 am

Features

  • 【HIGH SPEED STEEL】The step drill bit is made from high speed steel 4241 which has high hardness and good wear resistance.
  • 【WIDE SIZE RANGE】This single drill bit can be used for drilling a wide range of hole sizes from 5mm to 35mm, can be widely used.
  • 【HANDLE DIFFERENT MATERIAL】Our step drill is most commonly used on softer materials such thin iron sheet, aluminum, PVC and wood board of 3mm or thinner.
  • 【WIDE APPLICATION】Step drill is great for use in work where thin steel, aluminum or plastic boxes and chassis are encountered.
  • 【CLEARLY MARKED】The hole size are clearly marked on the surface, you can check the data easily.

Driak HSS4241 6-60mm/0.23"-2.36" Metric Spiral Groove Step Drill Bit Set 13mm/0.51" Shank Cone Drill Bit Hole Cutter for Wood Stainless Steel Cutting

 in stock
Amazon.com
as of January 5, 2021 5:45 am

Features

  • Metric HSS-4241 Spiral Groove 6mm - 60mm/0.23"-2.36" Step Cone Drill Bit Hole Cutter 13mm/0.51" Shank
  • Suit for use in hardness under 25 artifacts(Such as iron, steel, PVC panels, wood board ,Do not fit for cutting Stainless steel ) , The plate thickness under 5mm
  • it can not easily be broken.It can deburr, chamfer and open hole, but ordinary twist drill can't
  • Unique ladder structure , it can open multiple Aperture
  • Suit for use in hardness under 25 artifacts(Such as iron, steel, PVC panels, wood board ,Do not fit for cutting Stainless steel ) , The plate thickness under 5mm

OwnMy 35mm Concealed Hinge Jig Guide Locator Kit with Drill Bit - Hinge Drilling Hole Router Jig Hardware Template Guide Woodworking Tools for Kitchen Cabinet Doors Hinge (Orange)

 in stock
Amazon.com
as of January 5, 2021 5:45 am

Features

  • This set of concealed hinge jig kit with 35mm bit and depth stop is designed to help to drill perfect and accurate hinge holes before installation, an efficient tool for hinge installation of door, cabinet or DIY woodworking; it is also suitable for 26mm hinges but needs additional accessories.
  • There are two index dial limit blocks with 4 scales (3mm, 4mm, 5mm, 6mm) on the main part of hinge puncher, aiming to adjust the distance between 35mm hole and edge of wooden board, helps to drill same and corresponding holes on both sides of board.
  • Placing positioning rod to set the vertical distance ( 2 Distances available: 3'' / 75mm and 4'' / 100mm ) between the hole and the edge of the board, and block timber, making the hole depth accurately match the 35mm hinge.
  • Sharp and sturdy drill bit helps to drill accurate holes with little effort and not damaging your projects; simple and easy to use with any drills for any DIY woodworking lovers who needs to install hinges, not requiring much professional operation.
  • Made of engineering plastic and premium environmental protection metal, this set of hinge hole drill guide with comfortable touch are durable, reusable, scratch-resistant, dust-proof, and not hurting hands while using.

5PCS/Set Wood Carving and Engraving Drill Bit Milling Cutter Carving Tools

 in stock
2 new from $9.99
Free shipping
Amazon.com
as of January 5, 2021 5:45 am

Features

  • With Wood Carving and Engraving Drill Bit Set create your own wood crafts and bring the masterpiece into life!
  • Now you can easily complete any types of wood carving projects, with faster and higher precision detailing with the Wood Carving & Engraving Drill Bit Set.
  • Simple & Easy- Just install it like any other typical drill bit and it’s ready for some great action.
  • Highly Efficient- These burrs are intended for faster wood removal. Made of sharp high-speed steel, you can easily pare away woods much faster while leaving a smoother finish.
  • Optimal Precision and Detailing – Make wood carving a breeze without damaging the woods. Get accurate results with a smooth finish. No retouch needed.

Yakamoz 2Pcs 1/4-Inch Hex Shank Center Drill Bit Set Door Window Cabinet Self Centering Hinge Tapper Core Hole Openning Puncher Bits Woodworking Tools 5mm 1/4''

 in stock
Amazon.com
as of January 5, 2021 5:45 am

Features

  • Outstanding design: Unique design with perfect punch effect. Sawdust will be automatically discharged from the top of the holes on both sides, without drill blocked.
  • Easy to replace and install: According to the hardness of the wood, you can choose different centering drill, take the screw apart and you can replace the drill easily. At the same time, change bits fast which one-handed load and release.
  • Multifunction: Drill bush for precise positioning, without move. Applicable for the installation of the door hinge.
  • Different size: Include 2 different hinge screw sizes 1/4", 5mm for carpenters, cabinet, furniture makers and other wood working trades.
  • High quality material: Made of High-speed Steel, with high hardness, rustproof, solid, durable and excellent for use.

Yonico 42205R 5mm Right Hand Through Hole Boring Bit 10mm Shank

 in stock
2 new from $11.95
Free shipping
Amazon.com
as of January 5, 2021 5:45 am

Features

  • This right handed through hole boring bit has a 5mm diameter and a 45mm cutting depth. The shank is 10mm in diameter with a 20mm length. The shank also has a driving flat and a length adjustment screw.
  • Drill through bore holes for dowels, pins and screws
  • Carbide tipped for quality, durability and performance
  • Compatible with all standard drill press chucks

Best 35 5 millimeters wood drill bits Buying Guide

Before you buy a 35 5 millimeters wood drill bits , you should clarify your doubts in advance. Get help from other users’ opinions. Are there other things to consider besides the details described? Is the color correct, as you saw in the picture of the online shop? What is the actual content? Does the product still work after being exposed to water?

These are all questions that you as a consumer will surely ask. The manufacturers certainly want to achieve high sales with their products. The better known the brand is, the better the products are. Of course, there are also small and unknown brands that offer high quality products.

Therefore, pay attention to additional purchasing criteria. After all, it’s obvious that price is a deciding factor. If the price is not proportional to the quality, I recommend that you buy another product.

Conclusion

With the best 35 5 millimeters wood drill bits review & guide above. I hope you find the best product easier. Thanks for taking the time to read my article