Best 4 80 millimeters end mills review 2021 – Top Pick

“As an Amazon Associate I earn from qualifying purchases.”

Don’t BUY before reading my 4 80 millimeters end mills review first. It will save your time and money!

Best 4 80 millimeters end mills list 2021. Detail review below the list:

Last updated on January 14, 2021 8:40 am

Detail review:

5pcs P44-10*4*80mm Tapered Ball Nose End Mill Stone Carving Engraving Tools, Emery Diamond Tools CNC Engraving Cutter Bits on Marble

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Tapered Ball Nose End Mill
  • Stone Carving Engraving Tools

Dormer S5114.0 Shank Ball-Nosed End Mill, X-CEED Coating, HM, 4 mm Head Diameter, 11 mm Flute Length, 80 mm Full Length

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • X-ceed coating
  • Slotting, ramping mill direction
  • Dormer mill standard
  • Hm material

YG-1 99560 4.0 mm Carbide D-Power Ball Nose End Mill, 2 Flute, Long Length, 80 mm Length

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Higher hardness of film and excellent wear-resistance increase the tool life dramatically
  • Ultra fine film of YG-1’s diamond coated carbide ball end mills ensure the smooth and excellent surface on work materials
  • High performance on graphite, wrought aluminum, Bakelite, plastics, wood, brass, etc
  • YG-1’s diamond coated carbide ball end mills may have good result for the machining of non-ferrous metals and non-metallic materials

Osg USA, 3052040 2mm x 4mm x 1.6mm x 80mm 2FL Carbide Ball Osg Exocarb Wxs End Mill-Wxs, Degrees_Celsius, to Volts, Amps

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Osg list no. 4590
  • Made is usa
  • Easy to use

Sandvik Coromant R217.14 Carbide Square Nose End Mill, Metric, TiAlN Monolayer Finish, Non-Center Cutting, 60 Deg Helix, 4 Flutes, 80mm Overall Length, 9.5mm Cutting Diameter, 10mm Shank Diameter

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Good chip control gives secure performance
  • Low cutting forces for thin-walled components
  • Can reach to the bottom of a blind hole
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")

Sandvik Coromant R216.24 Carbide Corner Radius End Mill, Metric, TiAlN Monolayer Finish, 50 Deg Helix, 4 Flutes, 80mm Overall Length, 8mm Cutting Diameter, 8mm Shank Diameter, 2mm Corner Radius

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Round shanks allow use with a wide variety of toolholding systems
  • Shank Style: Cylindrical
  • Geometry: P

Sandvik Coromant R216.24 Carbide Corner Radius End Mill, Metric, TiAlN Monolayer Finish, 50 Deg Helix, 4 Flutes, 80mm Overall Length, 8mm Cutting Diameter, 8mm Shank Diameter, 2mm Corner Radius

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Round shanks allow use with a wide variety of toolholding systems
  • Shank Style: Cylindrical
  • Geometry: P

Sandvik Coromant R216.64 Carbide Ball Nose End Mill, Metric, TiAlN Monolayer Finish, 30 Deg Helix, 4 Flutes, 80mm Overall Length, 5mm Cutting Diameter, 6mm Shank Diameter

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Round shanks allow use with a wide variety of toolholding systems
  • Shank Style: Cylindrical
  • Geometry: G

Sandvik Coromant R216.34 Carbide Square Nose End Mill, Metric, TiAlN Monolayer Finish, 50 Deg Helix, 4 Flutes, 80mm Overall Length, 8mm Cutting Diameter, 8mm Shank Diameter

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Round shanks allow use with a wide variety of toolholding systems
  • Shank Style: Cylindrical
  • Geometry: P
  • Straight 9° to 12° General purpose 50% Core diameter

Sandvik Coromant R216.24 Carbide Corner Radius End Mill, Metric, TiAlN Monolayer Finish, Roughing Cut, 50 Deg Helix, 4 Flutes, 80mm Overall Length, 8mm Cutting Diameter, 8mm Shank Diameter, 2mm Corner Radius

 in stock
Amazon.com
as of January 14, 2021 8:40 am

Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Round shanks allow use with a wide variety of toolholding systems
  • Shank Style: Weldon
  • Geometry: H

Best 4 80 millimeters end mills Buying Guide

Before you buy a 4 80 millimeters end mills , you should clarify your doubts in advance. Get help from other users’ opinions. Are there other things to consider besides the details described? Is the color correct, as you saw in the picture of the online shop? What is the actual content? Does the product still work after being exposed to water?

These are all questions that you as a consumer will surely ask. The manufacturers certainly want to achieve high sales with their products. The better known the brand is, the better the products are. Of course, there are also small and unknown brands that offer high quality products.

Therefore, pay attention to additional purchasing criteria. After all, it’s obvious that price is a deciding factor. If the price is not proportional to the quality, I recommend that you buy another product.

Conclusion

With the best 4 80 millimeters end mills review & guide above. I hope you find the best product easier. Thanks for taking the time to read my article