Best 49 64 inches end mills review 2021 – Top Pick

“As an Amazon Associate I earn from qualifying purchases.”

Don’t BUY before reading my 49 64 inches end mills review first. It will save your time and money!

Best 49 64 inches end mills list 2021. Detail review below the list:

Last updated on January 22, 2021 8:40 pm

Detail review:

YG-1 - 18071 E1071 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 4" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter

 in stock
2 new from $18.34
Free shipping
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • Suitable for machining on aluminum and other nonferrous materials
  • 42-degree helix provides increased cutting action compared to end mills with lower helix angles
  • Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • High-speed steel for general-purpose cutting

Niagara Cutter N88396 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing Cutting, Non-Center Cutting, 30-Degree, 4-Flute, 3.25" OAL, 0.500" Cut Diameter, 0.500" Shank Diameter

 in stock
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills
  • Fine-pitch tooth design is suitable for machining high-temperature alloys
  • Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
  • Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges
  • Number of flutes varies by diameter for optimum feed and cut rate

YG-1 - 19071 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 5" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter

 in stock
3 new from $22.99
Free shipping
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • Suitable for machining on aluminum and other nonferrous materials
  • 42-degree helix provides increased cutting action compared to end mills with lower helix angles
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
  • High-speed steel for general-purpose cutting

HHIP 4952-0002 6 Piece 2 Flute and 4 Flute 3/8" Shank High Speed Steel End Mill Set

 in stock
2 new from $53.04
Free shipping
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • Single end
  • High speed steel
  • Center cut
  • Comes with stands
  • Includes one 2 flute and one 4 flute in the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2"

Star Tool Inc Carbide Square End Mill - Submicron Grain Carbide End Mill for Steels/Hardened Metals - Variable Flute Spacing & Helix Design - 4 Flute - 1/4" - Made in USA - EM-1443750SQ-TiAlN

 in stock
Amazon.com
as of January 22, 2021 8:40 pm

Features

Part NumberEM-1443750SQ-TiAlN

Kodiak Cutting Tools KCT166406 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 1/8" Diameter, 1/8" Shank, 1/2" Length of Cut, 1-1/2" Overall Length

 in stock
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • Made In the USA
  • 1/8 Shank Diameter
  • 1/2 Length of Cut
  • 1-1/2 Overall Length
  • 4 Flutes

Niagara Cutter N59848 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 1.5" OAL, 0.063" Cut Diameter, 0.125" Shank Diameter

 in stock
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • Miniature end mills create the intricate cuts needed for precision industries
  • Four flutes produce a better finish than fewer flutes
  • Carbide can run at higher speeds than high-speed or cobalt steel, offering increased wear resistance and high cutting temperatures
  • Uncoated (bright) tools have no additional surface treatment or coating to retain miniature end mill’s tight tolerances
  • Square nose end mills (also called square end) create sharp, unrounded cut

uxcell 45/64 inches x 5/8 inches 4 Flutes Straight Shank Milling Cutter End Mill

 in stock
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • Product Name : End Mill;Material : HSS-AL
  • Cutting Diameter : 18mm/45/64";Cutting Depth : 32mm
  • Shank Diameter : 16mm/;Total Length : 94mm
  • Color : Gray;Weight : 128g
  • Package Content : 1 x Straight Shank End Mill

Cleveland C41618 HG-2 High Speed Steel Single End 2-Flute Center Cutting End Mill

 in stock
6 new from $20.95
Free shipping
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • General purpose finisher
  • 2 Flute, cutting diameter 1/2", length of cut 1"
  • High speed steel bright
  • Made in the USA

Single End 4 Flute Center Cutting End Mill 6PCS Set 1/8",3/16",1/4",5/16",3/8",1/2" with 3/8" Shank with Plastic Stand

 in stock
Amazon.com
as of January 22, 2021 8:40 pm

Features

  • Single End, 4 Flute
  • High Speed Steel, Center Cutting
  • 3/8" Shank Dia. Overall Length: 2.5"
  • Including 1/8",3/16",1/4",5/16",3/8",1/2" Cuttng Dia.
  • Plastic Stand

Best 49 64 inches end mills Buying Guide

Before you buy a 49 64 inches end mills , you should clarify your doubts in advance. Get help from other users’ opinions. Are there other things to consider besides the details described? Is the color correct, as you saw in the picture of the online shop? What is the actual content? Does the product still work after being exposed to water?

These are all questions that you as a consumer will surely ask. The manufacturers certainly want to achieve high sales with their products. The better known the brand is, the better the products are. Of course, there are also small and unknown brands that offer high quality products.

Therefore, pay attention to additional purchasing criteria. After all, it’s obvious that price is a deciding factor. If the price is not proportional to the quality, I recommend that you buy another product.

Conclusion

Just consider my rankings for best 49 64 inches end mills above as a suggestion. The final choice is yours. Hope you can choose the best for you. Thanks for your reading. Have a nice day !